Note: Under the conditions of room temperature of 25 ℃ and relative humidity of 55-65%, M10-2 bolts nuts were treated with surface phosphating without clamping force and cured for 24 hours.

Weisbang thread sealant 2090, also known as thread locking agent, has medium strength, low viscosity, and good permeability. It is mainly used for locking and sealing pre assembled threaded fasteners, and can also be used for sealing gaps below 0.1mm in welds and micro holes such as casting cracks and sand holes, to prevent thread corrosion and rust.
Wesbond thread locking adhesive 2090 is widely used in industries such as aerospace, automotive, machinery, electronics, electrical, hardware, metallurgy, etc. for locking, sealing, holding, bonding, shock resistance, leak sealing, and corrosion prevention.

Instructions
To achieve good performance, the surface needs to be clean and free of grease. The bolts need to be coated with sufficient adhesive to fill all mating threads. This product works well in thin adhesive layers below 0.05mm. The larger clearance between oversized threads can affect the curing speed and strength of the product. This product will reduce the friction generated during assembly (torque tension ratio). In applications where the thread needs to be tightened to a critical value, this ratio should be determined in advance.

Storage conditions

Unless otherwise indicated on the label, the ideal storage conditions for this product are sealed in a cool, dry place at 8 ° C-28 ° C (46 ° F-82 ° F). The ideal storage temperature range is 8 ° C-18 ° C. To avoid contaminating the original adhesive, do not pour any adhesive back into the original packaging. For specific storage life information, please contact the Technical Service Center.