Suitable for rapid bonding of most plastic and elastic materials, especially for bonding porous, acidic, and absorbent materials. For example, if wood, paper, leather, and fabric are used in combination with surface treatment, they are also suitable for bonding difficult to stick materials such as PVC, nylon, PP, PE, silicone, etc.
Product Description and Application
Technology
Cyanoacrylate ester
Chemical type
Ethyl cyanoacrylate
Appearance (uncured)
Water clear
form
Single component - no need to mix
Viscosity
100-150（mPa?）
Curing method
Moisture curing
Application substrate
Plastic and rubber bonding
Curing speed 10s/24h
Main characteristics
1 universal type, low viscosity, suitable for plastic and rubber bonding
2. High temperature resistance of 100 ℃
Main applications
Small area bonding of plastics, metals, hardware, toys, gifts, handicrafts, etc.
Due to the different process requirements of various customers, please feel free to call our sales engineers or customer service personnel to let them know your detailed requirements and recommend suitable products to you at 0769-83842558.
packing
20 grams per tube, 10 tubes per box; 500g/bottle.
How to use:
If necessary, remove dust, oil stains, rust, etc. from the bonding surface, and clean the surface of the adhered object dry and quiet
If necessary, specific surface treatment agents need to be used to treat the surface. The choice of surface treatment agent varies depending on the material. You can visit the surface treatment section to learn about related products, or call 0769 83842558 to consult our technical engineers.
The 3-bottle quick drying glue only needs to unscrew the front cover to use. If you find glue at the bottle mouth after opening, you can first wipe the glue clean with a cotton cloth, and then put on a needle or PE dropper before use. This can control the flow of glue, ensure uniform application and bonding effect.
Drop a small drop of adhesive on the surface to be bonded immediately and keep it until it hardens
After use, clean the bottle mouth and tighten the lid. After use, store the glue in a cool and dry place, away from direct sunlight.
Storage
The product is stored in its unopened original packaging and kept in a cool and dry place. The storage information is marked on the label of the product packaging. Ideal storage conditions: 8 ℃ -21 ℃. Storing at temperatures below 8 ℃ or above 28 ℃ can affect product performance.
The product used outside the packaging box may be contaminated during use. To avoid contaminating unused glue, do not pour any glue back into the original packaging. Boxiang Company will not be responsible for products that have been contaminated or stored improperly as mentioned above. For more information, please contact the Technical Service Department or Customer Service Department of Boxiang Company.
matters needing attention
When not in use, be sure to avoid contact with the skin or eyes. Immediately rinse with plenty of water or seek medical treatment.
Maintain good ventilation in the workplace and use accelerators to reduce whitening. Use and storage should be kept away from sources of fire, in a cool and dry place, away from direct sunlight, and stored at a temperature below 20 ℃. If kept at room temperature for a long time, the performance of fast drying glue will rapidly decline.
If the quick drying glue is taken out of the refrigerator, it needs to be left indoors for 1-2 hours, and the bottle cap should be opened only after the glue has returned to room temperature. Otherwise, the glue will absorb moisture from the air, which will accelerate curing and deterioration.
After use, the bottle cap should be immediately closed to prevent the entire bottle from absorbing moisture and solidifying
5. This product should not be used in pure oxygen or oxygen rich environments, and cannot be used as a sealing material for chlorine gas or other strongly oxidizing substances. For safety precautions related to this product, please refer to Boxiang's Material Safety Data Sheet (MSDS)
Reasons for the whitening of quick drying glue:
Instantly, the adhesive comes into close contact with the material being bonded, and rapid curing occurs with very small gaps. The adhesive overflowing from the bonding area has a very slow curing speed. These uncured adhesives release cyanoacrylate monomers, which solidify with the moisture on the surface of the bonded material and adhere around the bonding area, resulting in whitening.
Measures to control and reduce whitening:
Clean the surface of the material before dispensing.
2. Control the dispensing volume to ensure even and thin dispensing to prevent overflow.
Strengthen ventilation around the adhesive during dispensing.
4. Use in conjunction with instant glue accelerator to accelerate curing.
Do not stack the products after bonding, and do not immediately seal the packaging,
It is recommended to fully cure the adhesive before packaging.
Choose low whitening instant glue.
