Product application:
TPU mobile phone sand case adhesive special glue
Weisbang 352 has been widely used in the mobile phone case industry and can provide customers with a complete solution.


Product features:
1. High strength: For difficult to stick TPU and PC, it has super strong adhesion, and the product cannot be torn apart, moved, or peeled off. Ensure that there is no oil leakage.
2. No whitening: High transparency after curing, no whitening or fogging (professional matte UV glue is also available)
3. Aging resistance: High and low temperature, high temperature aging, and good stability in low-temperature storage performance.


Performance parameters:
Appearance: Transparent liquid
Viscosity: Adjust according to structure
Hardness: Shore 70D
Curing energy 800mj-1100mj
Tensile strength:>30 (MPa)


Usage:
First, clean and air dry the surface of the adhesive, drop a small amount of adhesive solution onto the adhesive, press the surface tightly, and remove any bubbles in the adhesive layer. Use a high-pressure mercury lamp (power~250 W) to irradiate at a distance of~3cm for~12 seconds, or directly irradiate with sunlight for~25 seconds to cure (the curing time varies depending on the transparent material and lighting fixture). After leaving for 1 hour, the performance of the invisible adhesive reaches its best.


matters needing attention:
This product has a slight irritation to the skin. When using, avoid direct contact with the skin and inhalation of steam to prevent dripping into the eyes. After use, please wash with soapy water

Please consult Wisbon TDS for specific parameters