Application scope:
Widely used in the bonding, reinforcement, fixation, and protection of various electronic components, such as the bonding of electronic components on circuit boards, the bonding of speaker voice coils and sound films, the bonding of micro motor magnets, the bonding of micro motor coil vibration stones, the bonding of motor ferrites and electroplated metals, the bonding of ceramic sheets, and the bonding of speaker magnets. This product has anti vibration and impact resistance properties.


Product features:
1. UV+anaerobic curing, good deep curing effect
2. Strong adhesion to various materials such as plastics, metals, glass, ceramics, etc
3. High flexibility and impact resistance
4. Fast curing and good heat resistance


Parameter performance:
Appearance: Translucent liquid
Viscosity: 60-70
Hardness: Shore 65D
Curing energy 1000mj-1200mj
Tensile strength:>32 (MPa)


usage method:
1. Clean the surface of the material;
2. Apply glue to the surface of the material using a glue dispenser or manually;
3. Illuminate with a UV lamp with a wavelength of 365 nanometers until the adhesive layer has fully cured;
4. After UV irradiation curing, if there is still glue overflow around, tools can be used to remove it;


matters needing attention:
1. Ensure that the adhesive layer absorbs sufficient ultraviolet energy to achieve optimal curing effect, otherwise it will affect the adhesive performance of the adhesive layer;
2. The remaining glue cannot be returned to its original packaging,
3. It should be stored at room temperature away from light and kept away from children.


term of validity:
Store at room temperature (10-25 ℃) under dark, sealed, and cool conditions, with a shelf life of 12 months


Packaging specifications:
250ml/bottle 1000ml/bottle


Please consult Wisbon TDS for specific parameters