Application scope:
ABS、 Acrylic and other engineering plastics, organic glass crafts, bonding between glass and organic board, and bonding between organic board and metal
Also used for bonding or encapsulation of glass/metal, glass/glass, glass/plastic, organic glass, etc. required in optical instruments, medical devices, handicrafts, furniture, and construction industries.


Product Features:
1. The appearance is colorless and transparent, and the transparency is very good after curing
2. Good fluidity, high strength, resistance to yellowing, and can withstand high temperatures of 100-120 degrees
3. Low viscosity, permeable for adhesive application
4. Passed the EU RoHS standard.



Performance parameters:
Appearance: Transparent liquid
Viscosity: Adjust according to structure
Hardness: Shore 70D
Curing energy 1000mj-1200mj
Tensile strength:>30 (MPa)
Optical performance: The adhesive solution is crystal clear and transparent, with a light transmittance of over 90% after curing, and a refractive index similar to that of glass.
Adhesive performance: After curing, the volume shrinkage rate is small, the elongation rate is large, and the adhesive strength is high.
Weather resistance: Good weather resistance, no yellowing after long-term exposure to ultraviolet light, and can be used in the temperature range of -50 ℃ to+80 ℃.


Usage:
First, clean and air dry the surface of the adhesive, drop a small amount of adhesive solution onto the adhesive, press the surface tightly, and remove any bubbles in the adhesive layer. Use a high-pressure mercury lamp (power~250 W) to irradiate at a distance of~3cm for~12 seconds, or directly irradiate with sunlight for~25 seconds to cure (the curing time varies depending on the transparent material and lighting fixture). After leaving for 1 hour, the performance of the invisible adhesive reaches its best.


matters needing attention:
This product has a slight irritation to the skin. When using, avoid direct contact with the skin and inhalation of steam to prevent dripping into the eyes. After use, please wash with soapy water

Please consult Wisbon TDS for specific parameters