亚洲AV无码成人精品区狼人影院,国产微拍精品一区二区视频,人妻有码中文字幕在线

Recommend Product

Contact Us

Dongguan Bo Xiang Electronic Material Co., Ltd.
Service Hotline: 0769-83842558
Add: Huangjiang Town, Dongguan City, Jiang Haicheng management area

Vsbood 6020

Single component, anaerobic type, green High strength, high viscosity, high temperature resistance of 230 ℃ Maximum radial filling gap 0.3mm Suitable for holding shaft hole parts under high temperature conditions, such as valve sleeves, injection molded core sleeves, valve sleeves, cylinder liners, and key slots.

Product Desc
Product Detail

Single component, anaerobic type, green
High strength, high viscosity, high temperature resistance of 230 ℃
Maximum radial filling gap 0.3mm
Suitable for holding shaft hole parts under high temperature conditions, such as valve sleeves, injection molded core sleeves, valve sleeves, cylinder liners, and key slots.

Product code	Typical use	Maximum thread diameter MM	Before solidification			After solidification*	After solidification*	Fixed line speed	Fixed line speed
Product code	Typical use	Maximum thread diameter MM	colour	viscosity GB/T2794 -1992 MPa.s	density GB/T13354 -1992 g/cm3	Maximum sealing pressure Mpa	Working temperature ℃	Full solid (h)	Full solid (h)
6020	High temperature resistance of 230 ℃	0.25	green	8000 thixotropy	1.15	>17	-50~230	10~20	24

Note: *At room temperature of 25 ℃ and relative humidity of 55-65%, the adhesive was applied to a steel shaft and sleeve with a meshing diameter of 12.5mm, length of 12.5mm, and gap of 0.05mm, and cured for 24 hours.

Application:

Wesbond cylindrical retaining adhesive 6020 is a single component anaerobic adhesive, green, high-strength, high viscosity, high temperature resistance of 230 ℃, with a maximum radial filling gap of 0.3mm to prevent metal micro vibration wear, corrosion, and leakage.

Wisbon cylindrical retaining adhesive 6020 is suitable for retaining shaft hole parts under high temperature conditions, such as valve sleeves, injection molded core sleeves, valve sleeves, cylinder liners, and key slots.
For example, the wire cone and wire head are matched with the guide plate for positioning, the cylinder head injector liner of the automobile internal combustion engine is fixed, and the oil dipstick seat of the internal combustion engine is fixed

Product Center

Recommend Product

Contact Us

Vsbood 6020

About Us

Products Center

News